MOVE XABCD backwards / forwards for TABLES DISPLAY:

For this you can use the ARROW KEYS left or right or the shift left or shift right MENU SELECTION above the Smart UP selection.

Left click on button and draw RED line from high to low for the range required

DRAWING TOOLS: draw Trend lines & support resistance lines, retracement levels, etc:

1. Select the correct Button for the drawing tool you wish to use.

2. Place Cursor on the starting point and hold down LEFT CLICK and drag cursor to where you want it and release.

3. You can move lines with the "hand Option" by selecting the line and hold LEFT CLICK and DRAG. A double left click with the "hand option" displayed will remove that line tool.

4. You can remove all drawing tools from the display by keying the fast key "L" or select "clear all lines" from the RIGHT CLICK MENU OPTIONS.

The Drawing tools will be retained on your individual REPORTS until you remove them yourself. Yet they maybe displaced if you change the X/Y axis on your report display. The Reports can be manipulated to display up to 500 data bars using the [ or ] keys.

The SWING VALUES can be adjusted up or down quickly in waves of similar degree using the SMART KEYS - PgUP or PgDn.

XABCD Pivots can be highlighted quickly on or off with the Keys X-A-B-C-D on the keyboard.

Geometry from the XABCD table calculations can be highlighted by left clicking the appropriate box in the tables.

1:1 table calculations can be displayed by left clicking the appropriate box.

Retracement tables can be displayed by left clicking the appropriate box.

2 and 3 day SWING levels can be displayed by left clicking the table boxes.

TREND WAVES can be displayed by left clicking the FAST, MEDIUM or SLOW boxes.

Gann swing overlays can be selected by left clicking the appropriate boxes.

RSI, STOCHASTIC or DMI displays can be selected by left clicking on the tables for them.

PIVOT POINT LINES (Magenta lines) - Toggle Keys X, A, B, C, D to switch ON/OFF:

These are standard support & resistance levels to monitor.

Settings are available for each column between 2 and 9 days

If the SWING is UP the LOW will be the swing REVERSAL POINT.

If the SWING is DOWN the high will be the swing REVERSAL POINT.

To remove the lines drawn simply click the appropriate box a second time.

Assistant Mk III Gann Swings are now set to 3-5-8 periods.

Additional time frame reports to allow 1 minute, 3 minute, 5 minute, 10 minute, 15 minute, 30 minute, 60 minute and daily reports at the click of your mouse. Hourly time markers have been added to the lesser time frames up to 15 minute.

Easier to use selection buttons for drawing Rays, Retracements, Arrows and activating the cursor to read high/low, date and time for individual chart bars.

Automatic display of KEY 1:1 geometry on reports when swing size displayed is not consistant with these 1:1's. (This feature will ensure that you don't miss events that you have not previously considered).

Automatic display of KEY 38.2, 50 and 61.8 retracement levels when swing size is not consistant with the table geometry being displayed. (These will range from smaller to larger degree irrespective of the swing degree you are monitoring.)

Time Cycle displays on all report charts including Time by Degree on the daily report charts, (these are based on the swing degree you are monitoring).