|
Follow these instructions to install your WT ASSISTANT efs modules to your eSignal page.
The AUTO install when you receive the WT ASSISTANT program will copy the efs modules to the correct eSignal FOLDER locations.
In case you have to do a physical install the folder locations for the WT ASSISTANT files are:-
1. The WT ES.dll must reside in your C:\Program Files\eSignal folder.
2, The WT ES Assistant 0 to 8.efs must reside in your C:\Program Files\eSignal\Formulas folder.
|
Loading EFS Procedure
The WT-ES Assistant Mk V is a 3rd party application for use in the eSignal advanced charts environment.
The WT-ES Assistant Mk V runs a DASH BOARD in your eSignal environment and publishes external charts and reports to another auxillary screen in multiple screen computer set ups.
Installing your WT-ES Assistant Mk V DASH BOARD to your eSignal charts layout:
SUMMARY:
Moving all the panels into ONE indicator pane:
1. Left click in the panel to be moved and hold the left click ON whilst at the same time pressing and holding down the SHIFT KEY on the keyboard and drag the panel over the first panel WT ES Assistant 0.efs.
2. When the panel arrives where you intend it to go (Wavetrader ES Assistant panel) eSignal will display a square border on the frame - release the cursor and the SHIFT KEY.
3. Now it is set except you will need to set up a 500 bar TIME TEMPLATE similar to what we use in the WT III - details can be found on this link on our web site.... TREND WAVE
4. When you complete the process you will need to save the page as a set up Advanced Chart pages so you can load it at anytime in the future without going through this whole loading process.
5. I have given mine a name of WT-ES
6. To save the page select PAGE from the eSignal selection list and select Save page as (see instruction below).
7. After you have finished Right Click on your chart and select STACK STUDIES.
8. You can also add additional eSignal studies to the same page if you wish and stack them to be available from a selection bar below the lower window pane or you can mix them into the ASSISTANT page.
When you are finished: Select Page from the eSignal menu and use:-
1. Save Page As...... (give it a name eg., WT-ES)
This layout is now saved and can be reloaded from PAGE each time you reload eSignal.
2. Once you have created a page just use SavePage from PAGE each time you modify the PAGE
3. WT-ES - SETTINGS
SETTINGS MENU for WT-ES Assistant Mk V
All these WaveTrader ES Assistant settings can be altered to USER PREFERENCES.
If you change any settings it will be necessary to choose the SAVE option and then RELOAD your eSignal page before they can take effect.
|